Surelock McGill (North America) 2380 Fortune Drive, Suite 120 - Lexington, KY 40509 - USA
Telephone 1-859-899 7870   Fax 1-859-899-7880   Email NASales@surelockmcgill.com
Surelock McGill
 (Head Office) 26 The Business Centre - Molly Millars Lane - Wokingham - Berkshire - RG41 2QY
Telephone  +44 (0) 118 977 2525   Fax +44 (0) 118 977 1913   Email sales@surelockmcgill.com


Copyright © 2016 Surelock McGill Limited. All rights reserved.

Assessed to ISO 9001:2008

LPCB Cert No. 516-1

HOME  |  CONTACT US  |  SITE MAP  |  COOKIE POLICY

Ask the locking technology experts, no sales pitch or obligation, just a clear answer to your question.

>> Click Here

experts

ask the

NASales@surelockmcgill.com
1-859-899 7870
Contact Us

Surelock McGill cylinder guards protect cylinders against high levels of attack aimed at the forced removal and drilling of the cylinder. This increases the physical security of almost all types of cylinder and lock configuration.

The cylinder guards are applicable to cylinders from most leading manufacturers whether the lock in which the cylinder is fitted is surface mounted or morticed into the door. They protect against physical attack, drilling and forced rotation of the cylinder and are tested using tools specified in the test standards of both HM Government and the commercial test standards of LPS 1175.

For full details of all our Ancillary Products
 CLICK HERE

Cylinder Guards - Protection for Cylinders

Rim latch cylinder guards
S-10167 (option code P)
S-10388 (option code P
5)

Rim latch cylinder guard:
S-11136 (option code P
6)

Euro-profile cylinder guard:
S-10261 (code P
4)

‘Challenger Euro-profile Cylinder Guard

Retro-fits to most Euro-profile locks

Ordering code: S-10931-O (n)

Note: The anti-drilling disc is matched to the make and cylinder model, please append the Surelock cylinder option code O(n) to the ordering code (refer to Surelock ‘Enhancements’ for cylinder codes).

The ‘Challenger’ polished stainless steel cylinder guard is fitted with a rotating anti-drilling spinning disc, to provide protection for Euro-profile style cylinders.

The fixing screw positions are suited to locks with the conventional two fixing holes at 38mm centres, providing through bolt fixing for maximum strength and impeding forced removal.

The guard is supplied with a selection of stainless steel shims to allow for up to 5mm variation in cylinder projection of between 10-15mm; further shims are available if required.

‘Challenger’ Euro-profile cylinder guard with through bolt fixing

Rim-Latch Cylinder Guards

Stainless steel round body and a rotating anti-drilling disc, tested on security doors to LPS Security Rating 3

Ordering code: S-10167 (enhancement code P)

Anti-drill front nose section with stainless steel body and a rotating anti-drilling disc, tested on security doors to LPS Security Rating 4

Ordering code: S-10388 (enhancement code P5)

Anti-drill front oval nose section with stainless steel body and a rotating anti-drilling disc, tested on security doors to LPS Security Rating 5

Ordering code: S-11136 (enhancement code P6)

Euro-Profile Cylinder Guards

Stainless steel round body and a rotating anti-drilling disc. A selection of shims compensate for variations of cylinder projections and twin bolt through fixing.

Ordering code: S-10261 (enhancement code P4)

Base

Enhanced

High

Base

Ingersoll SMC1 Cylinder Replacement Housing

Replacement Housing for a straight forward simple retro-fit

It has previously been difficult to replace the Ingersoll Rim Cylinder with another type because of it’s unique footprint. The Surelock SMC1 addresses this problem making it easy to upgrade to a modern high-security type. Using the SMC1 ensures:

The SMC1 is a Cylinder Protection Housing that has the same footprint and central tang arrangement as the Ingersoll Rim Cylinder but which provides a secure, protected mounting for KIK Cylinders from most leading manufacturers such as: