Slimline Delayed Egress
The Surelock McGill Slimline Delayed Egress system is a multi-threat multi-point bolting system with a time delay facility that addresses the issue of opportunistic ‘run-out’ theft through a fire escape door. In addition the Delayed Egress allows for a connection with a fire detection system, avoiding a potential compromise in safety.
operations
Optional Entry - No entry as standard. If key entry required please contact our technical department.
Exit - Operating the panic bar activates an alarm (If wired to integrated system) and a timer but does not allow immediate exit. After the time delay (configurable 6 to 60 seconds) the panic bar can be operated, allowing free exit. In the event of fire alarm or power cut the system will allow immediate egress. Upon door closure the bolts will automatically engage and secure. The alarm is reset by a key switch.
Exit - Operating the panic bar activates an alarm (If wired to integrated system) and a timer but does not allow immediate exit. After the time delay (configurable 6 to 60 seconds) the panic bar can be operated, allowing free exit. In the event of fire alarm or power cut the system will allow immediate egress. Upon door closure the bolts will automatically engage and secure. The alarm is reset by a key switch.
features
- Supplied with dedicated 12V DC power supply as standard, with 24V DC optional
- Pre-set time delay when panic bar is depressed, exit is permitted after the delay
- Surface mounted for maximum strength
- Timer set at 10 seconds as standard- adjustable from 6 to 60 seconds on site
- 15mm (0.59") stainless steel bolts with 25mm(0.984”) throw
- Designed for the solenoid to withdraw with up to 80kgs of pressure applied to the panic bar
- Suitable for doors 2.2m (86.61”) high and extensions available for taller doorsets
- Supplied with bolt status monitoring as standard
- Audible alarm activated during the time delay
benefits
- Allows connection with detection/fire alarm systems
- Anti-breach feature (delayed panic bar) helps to stop ‘run-out theft’ and unauthorised use without compromising safety
- Allows immediate exit in the event of fire alarm or power failure
- Automatically re-secures the lock upon door closure
- Engineered for longevity and trouble-free service
- Upgrade solution for existing doors
- Can be used with automatic door operators
Optional Entry Methods
LEO
Optional Exit Methods
Panic Bar
(meets EN1125)
Push Pad
(meets EN179)
Slimline International Combined Ratings and Accreditations
Tested on specific doorsets up to LPS 1175:SR6
US State department FE/BR SD-STD-01
Tested on specific doorsets up to EN1627
Blast - For details contact
our Technical Dept
our Technical Dept
EN1125/EN179/UL305
UL10C (upto 3 hours)
BS476 PT22/EN1631-1
BS476 PT22/EN1631-1
UL752/EN1522/23
FB1- FB7 & FSG
FB1- FB7 & FSG
Independently
Tested
Tested
Above performance results are based on independent third party testing or assessment on selected doorsets.
